Becos Beko

Our existing washing machine has stopped working (more on that elsewhere). As a fix it was decided to buy a cheap second-hand spare off Facebook Marketplace to fill the gap. For £50 enter a Beko WTL74051W washing machine. Beko is a Turkish brand (the machine was made in Turkey) of Arçelik A.Ş. which also owns Grundig, Indesit, Hotpoint, Arctic, Ariston, Leisure and Blomberg. They aren't great machines, but have a reasonably good reputation for being cheap and cheerful (just not in terms of energy efficiency).

Beko WTL74051W
Washing Machine

This particular one came from under a tarp in someone's back yard, but it didn't look too bad (and was being bought from a friend of the Major's). Unfortunately the whole process was completed in a bit of a rush and I forgot to look at it properly. I didn't even spin the cylinder to make sure the bearings were OK, 😟. Once it was on the van I did notice that underside looked OK, if a bit cobwebby. But, stupidly, the fact that one of the feet was missing passed me by.

Wonky washer

The vendor couldn't find the original foot. So now there are two broken washing machines in the house 😞.

Beko washing machine underside showing
foot placement inside and out (circled)

On inspection the feet are screw-threaded with a plastic lock nut and fit into a press-moulded tapped socket made from the case of the machine. As you can see there is a bit of rust on the case under the front right foot, actually the one that was missing. Hopefully this won't be a problem…

Original and replacement Beko washing machine feet

Fortunately getting a replacement foot wasn't a problem and was only a fiver. I washed the other feet as they were a bit grotty and gave the insides a light vacuuming. After that it was simply a matter of screwing the feet back on and pushing the machine back under the counter after it had been plugged in and connected to the cold water supply. Levelling the machine was straightforward and an empty test run was uneventful.

JOB DO…

Then the Major then came along, after previously expounding on her expert knowledge of washing machines, and put three times the recommended soap powder into it causing it to leak everywhere. Working on the basis that, A) it will be sold at some point in the nearish future and B) the designers should have planned for this misuse case, I've elected to cross my fingers and assume that it will be OK to keep using it as is. However I still think I'll need to extract it from under the counter and give it a once over, but I'll let it dry out properly before attempting that as I don't want tip it and get water into places the machine isn't designed for.

JOB DONE

Time: 10 mins

Cost: £5.29 (or £55.29 inc. washing machine).

Kitchen Scissors

Following in the footsteps of the tin opener, ;the kitchen scissors also broke. At some point one of the handles had gotten too close to the stove and been melted a little. Then someone else seems to have dropped them and the loop of the handle has snapped. Although this is all supposition, I was presented with them as "found like this." On inspection you can see that it is a clean break.

Damaged kitchen scissors

At this point I'd pared back the bubbled plastic so it isn't really visible on the close-up. Ideally I would like to have solvent welded the break but, as I couldn't identify the manufacturer (initially), I couldn't find out what polymer it was made from. Assuming it might be ABS I tried MEK but it didn't touch it at all, with none of the usual tackiness that usually results from interactions between the two. My next guess was nylon, as the bubbling on the handle looked a lot like the same damage you get on a fish slice that has been overheated, which means superglue. In the end it turned out to be polypropylene so superglue was probably not the best choice, but I didn't know that at the time.

So I retrieved the superglue from storage, applied it and it stuck well. However superglue does not do well in water so I needed to protect the joint somehow. I settled on a liberal application of black electricians' tape. The result, whilst not pretty, was functional.

Repaired kitchen scissors

If I'd had my wits about me I would have used heat shrink sleeving instead but I didn't have my good head on that day.

The Wrong Head

Fast forward six months and the repair is still solid, so no complaints, even though now I'm not sure whether it is the superglue or the electrical tape that is holding it together. However one of the tykes has walked off with them and they are not coming back (just the scissors, I think). So I am back into purchasing mode, as with the tin opener 'repair.'

I'm not sure where the scissors originated from. The view is that they are probably from Oxo but no-one really knew. However, they had been a good pair of scissors and were still providing reliable service. Five out of seven review sites recommended Oxo Good Grips Kitchen & Herb Stainless Steel Scissors. These aren't the same design as the earlier scissors (if they were Oxo, that is), but the most important feature is that they come apart for cleaning. It also makes sharpening them a lot easier as well.

In an ideal world an all steel design would be better as there is no risk of the blades parting company with the handles. The downside of this, though, is that it increases their weight and to minimise this manufacturers make the handles smaller and thinner and this impacts on the comfort of using the scissors. I suppose wrapping a stainless steel core with a better grip would ease this, but that is more pennies for the manufacturer to lay out. Another factor against all-steel designs is that they are pretty exorbitant, think £50-100 a pair compared to £17.50 for the Oxo scissors, ouch! You'd have to get a lot of use out of a pair to support that cost and our last pair has lasted over 10 years.

So, Oxo it is.

Oxo Good Grips Kitchen Scissors

Probably.

Not being able to identify the source of the original scissors was irking me. Guessing that they might be from Lakeland or Debenhams a Google search for images identified something similar from Lakeland. Right-clicking the picture and copy image link and it was off to Google image search (which has steadily become more and more useful over the years).

Using Google Image Search to identify the manufacturer

And they were quickly identified as Arcos Prochef Series 195 mm Kitchen Scissors. As I had no complaints about the first pair I dropped the Oxo scissors and rebought the original ones from the Arcos Store on Amazon. Even better they were only £9.86, about half the price of the Oxo scissors.

Their advert could use a bit of work though. I could have had them for £7.20 if I would have picked them up at the local Post Office, but the delivery time, stated as "Usually dispatched within 6 to 7 months," was a little too long to wait. Also the handle material was described variously as polypropylene, polyoxymethylene and wooden all on the same page.

Arcos shonky Amazon product page

Arcos makes a great play of their Spanish heritage but, like everything else, these are made in China. The blades are fashioned of something called Nitrum stainless steel; it turns out that this is a tradename for Arcos' own brand of stainless steel. Its composition is a secret, apparently. A secret to everyone, that is, apart from any other knife manufacturer with access to an XRF analyser who will know the elemental composition. Arcos haven't patented it, so my guess is that this 'secret sauce' is probably more marketing than technical know-how. Not that this really affects my use of the scissors.

Once the scissors arrived they were washed, dried and put into service. One thing I noted when dealing with the packaging was that they come with a 10 year guarantee that isn't even mentioned on their Amazon product page, which is nice.

So for Arcos, 9/10 for their cost and quality but 2/10 for their Marketing Dept.

JOB DONE

Time: A day of research

Cost: £9.86